© Copyright QVIS® All documentation rights reserved.
55
19.6
PTZ / RS485 Device
This menu will allow you to configure the attached PTZ or other device connected
to the RS485 ports on the rear of the DVR.
Pic 4.37 PTZ configure
【
Channel
】
Choose the dome camera input channel.
【
Protocol
】
Choose the corresponding dome protocol. (PELCOD as an
example)
【
Address
】
Set the corresponding dome address. Default: 1.
（
Note
：
The address must be consistent with the dome address.
）
【
Baudrate
】
Choose the corresponding dome baud rate length. You can
control the PTZ and vidicon. Default: 115200.
【
Data bits
】
Includes 5-8 options. Default: 8.
【
Stop bits
】
Includes 2 options. Default: 1.
【
Parity
】
Includes odd check, even check, sign check, blank check.
Default: void.
【
Protocol
】
choose related protocol of brand model
【
Address
】
set with corresponding address, default is 1
【
Baud rate
】
choose the baud rate that the related device uses, default is
115200
【
Data bits
】
including 5-8 options
，
default is 8
；
