© Copyright Qvis ®. All documentation rights reserved.
24
4
Playback
mode
and
channel
selection
pane.
Playback mode
：
1/4/9/16. (It may vary due on different NVR models.)
In 1-window playback mode: you can select one out of the 16 channels.
In 4-window playback mode: you can select 4 channels according to
your requirement.
In 9-window playback mode, you can switch between 1-8 and 9-16
channels.
In 16-window playback mode, you can switch between1-16 and 17-32
channels.
The time bar will change once you modify the playback mode or the
channel option.
5
File list
switch
button
Double click this button; you can view the picture/record file list of
current day.
The file list is to display the first channel of the record file.
The system can display a maximum of 128 files at any one time. Use
the
/
or the mouse to view the file. Select one item, and then double
click the mouse or click the ENTER button to initiate playback.
You can input the time period in the following interface to begin an
accurate search.
File type
：
R
—
regular record
；
A
—
external alarm record
；
M
—
Motion
detect record.
Lock file. Click the file you want to lock and click the button
to
lock. The file locked will not be overwritten.
Search locked file: Click the button
to view the locked file.
Return: Click button
, system goes back to the calendar and the
channel setup interface.
Please note:
System locks up to 16 files. The size of the locked file shall be less than
a 1/4 of the HDD
’
s total space. The first 16G of each partition cannot be
locked.
System can only lock one file at one time and cannot lock the extra
stream. For the file that is writing or overwriting, it cannot be locked.
6
Card
number
search
The card number search interface is shown as below.
7
Playback
control
pane.
►/
Play/Pause
There are three ways for you to begin playback.
The play button
Double click the valid period of the time bar.
Double click the item in the file list.
In slow play mode, click it to switch between play/pause.
