Qvis iBox nvr, User Manual

Page: 125 / 175

© Copyright Qvis ®. All documentation rights reserved.
116
Parameter Function
Remote
host
PPPOE

Input the user name, password and which ISP (Internet service supplier)
provider then chose enable.

Reboot system after configuration is saved and the device will auto
connect to Internet. The IP address is the WAN IP.
There are two conditions for reboot:
1. The user must have the authority to reboot device.
2. There is no user login the system menu on the local end

After PPPOE dial has succeeded, get the current IP address and visit
this IP address via WEB.
Email
The email interface is shown as in Figure 7-31.
Figure 7-31 Email
Please refer to the following sheet for detailed information:
Parameter Function
SMTP Server

Input server address and then enable this function.

You can also input the corresponding server domain
name here, but you need to go to DNS interface
(chapter 7.3.4.1) to set the server IP that can parse the
domain.