Qvis AMB-VANIR, User Manual

Page: 8 / 32

© Copyright Qvis ®. All documentation rights reserved.
2
Alarm
Function

Real-time response to external on-off alarm input. User can setup prerecord
time length before alarm trigger incident ( also allows user to pre-record audio
file)

Real-time video detect: motion detect, camera masking, PIR human body
movement detect.

Generates an alarm when a network or a Micro SD card abnormal event has
occurred.
Network
Management

Allows network camera configuration and management via Ethernet.

Supports device management via web or client-end.
Peripheral
Equipment

Supports an on-off alarm device, which triggers either through sound or light.
Power

External power adapter DC12V.

Power over Ethernet (PoE). Conforms to the IEEE802.3af standard.

Connect the device to the switch or the router that supports the PoE function
to obtain operational power.
Warning
！
Do not connect these two power supplying sources to the device at the same
time; it may result in device damage!
Please note: system cannot support these two types of power supplying at the same
time. As a recommendation, if you wish for your security system to be able to continue
to run when there is a loss of power or unstable electrical supply coming from the
mains, a UPS system should be installed.
Assistant
Function

Log function

Support PAL/NTSC

Day/Night mode auto switch (electromagnetic ICR switch).

Auto iris adjustment

Built-in IR light. Support IR night vision

Backlight compensation: screen auto split to allow for the backlight
compensation to adjust the brightness.

Supports electronic shutter and gain setup.

Supports 3D NR.

Supports video watermark function to avoid unauthorised video modification.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for product performance specification:
Model
Parameter
AMB-VANIR AMB-VANIR-2 AMB-VANIRM2
S
yste
m
Main Processor Ambarella A5S Series DSP
OS Embedded LINUX
System
Resources Support real-time network monitor, local record, and remote operation
at the same time.
User Interface Remote operation interface such as WEB, PSS.
System Status
Bit stream statistics, log, and software version.