© Copyright Qvis ®. All documentation rights reserved.
15
3.2.2 Lens pan rotation angle setup
Please refer to Figure 3-5 to unfasten the lock screw
A
and adjust the pan monitor angle to the proper
position. Then fix the lock screw
A
. The pan angle ranges from 0°~+350°.
Figure 3-5: Pan rotation angle
3.2.3 Lens tilt rotation angle setup
Please refer to Figure 3-6 to unfasten the lock screw
B
and lock screw
C
and adjust the tilt monitor angle to
the proper position. Then fix the lock screw
B
and lock screw
C
. The tilt angle ranges from -23°~+73°
The manual zoom lens focus interface is shown as in Figure 3
– 6 (adjusting screws found on both
motorised and non-motorised cameras).
Figure 3
– 6 Lens tilt rotation angle
3.2.4 Image pan rotation angle setup (Non-motorised Cameras only)
Please refer to Figure 3-6 to turn lock screw
D
to adjust the video pan angle. Then fix the lock screw
B
and
C
. The video pan angle ranges from 0°~+350°.
IMPORTANT:
Please note Figure 3-5 and Figure 3-6 are based on the IR motorized zoom camera. For the IR
manual zoom camera the lock screw position and the lens angle adjustments are the same.
Lock Screw A:
Adjust lens pan rotation
angle.
Lock Screws B and C:
Adjust lens tilt rotation.
Lock Screw D:
Adjust lens pan
rotation.
Summary of Contents for AMB-VANIR
Page 2: ...i...
