COMPONENT
PLACEMENT
15
Step
9
Route and connect the printer cable to the
upper left USB port on the computer. Also
plug the video monitor into the video port.
Route the mouse and keyboard cables
through the hole on the top of the cart;
through the hole in the shelf below and plug
into the computer.
10
Place the monitor face down on a soft, clean,
flat surface. Attach the universal bracket to
the rear of the monitor. Tighten the screws
securely.
Caution! Be careful not to scratch or damage
the LCD screen.
Attach bracket to back of monitor here
Summary of Contents for Q-Stress 4.6
Page 4: ...SCOPE 2...
Page 8: ...HARDWARE CONNECTIONS 6...
Page 10: ...SYSTEM INSTALLATION ON A STRESS CART 8...
Page 14: ...INSTALL THE WRITING SURFACE AND PAPER TRAY 12...
