ADJUSTMENT
OF
TOP
SURFACE
HEIGHT
10
Step
4
Turn the top surface over and lay it on the cart (or
a flat area). Remove the screws connecting each
riser to the top surface
5
Rotate each riser 90 degrees and fasten back to
the top surface.
6
Turn the top surface so the risers are on the
bottom and lined up with the holes on top of the
cart. Replace on cart. Reattach the four screws
that hold the monitor to the cart.
7
Reattach the screws that hold the risers to the cart
(you will need to work from under the cart).
8
Reattach the monitor holder and monitor to the
cart.
Summary of Contents for Q-Stress 4.6
Page 4: ...SCOPE 2...
Page 8: ...HARDWARE CONNECTIONS 6...
Page 10: ...SYSTEM INSTALLATION ON A STRESS CART 8...
Page 14: ...INSTALL THE WRITING SURFACE AND PAPER TRAY 12...
