Q u i n t e z z RADAR ALERT
English
16
8.4
WARNING
The TMC-system works with fixed locations on the A-roads and almost all N-roads. These locations
are situated a few kilometers from each other. On the moment a flash-notification is broadcasted via
TMC, not the hectometer-picket is shown, but the TMC location. This TMC-location can vary a few
kilometers from the real location of the camera. To make sure a warning is given in time, the QUINTEZZ
RADAR ALERT will give a warning at a distance of 5 km before the TMC-location.
First of all the next display will be shown:
And you will hear the warning ‘Be Careful’. This warning will be repeated if you are at a distance of 4,
3, 2 or 1 Km of the TMC-location. This is independent of your direction of driving. So it could be that
you receive a warning that is meant for a road near-by. That is why the road number is shown in the
display.
If you are at a distance of less than 1 km of the TMC-location, the following display will be shown:
And you will hear the warning ‘Be Careful’. If the distance between your position and the TMC-
location becomes larger, no notification will be shown. This is the case when you have passed the
TMC-location.
8.5
UPDATING TMC-LOCATIONS
After installation you will also find a TMC-button in the software. Through this option you can load
new TMC-locations in the RADAR ALERT, if the TMC-system should change in the future, or expand
with more roads.
DEFAULT SETTINGS
A. MODE SELECTION
: DRIVING MODE
B. WARNING LIMIT
: 130 KMH
C. ILLUMINATION
: 100 %
D. SET UNIT
: KMH
E. TIME ZONE
: GMT +0
F. CLOCK BELL
: ON
G. RESET ODO
: NO
H. VOLUME LEVEL
: 80%
m_QuintezzAlert_GB.pmd
16.09.2005, 12:29
16
