Quincy QSI-90, Instruction Manual

Page: 61 / 92

Section VI - Compressor Fluids
Understanding the Analysis Report
Reference the page 46 for a copy of a
blank analysis report.
a) REPORT DATE - The date that the
fl uid was analyzed.
b) REPORT NUMBER - The assigned
number to this report.
c) CUSTOMER ADDRESS - The name
and address of person that this report
is being mailed to. This information
is being taken from the sample bottle
as it is received.
d) CUSTOMER - The owner of the unit
that sample came from.
e) COMPRESSOR MANUFACTURER
- Brand of compressor sample taken
from.
f) FLUID TYPE - This should always be
one of the fl uids listed in the previous
section.
g) SERIAL NUMBER - The unit serial
number of the Quincy compressor
the fl uid sample was taken from.
h) MODEL NUMBER - The model
number of the Quincy compressor
that the fl uid sample was taken from.
i) HOURS ON FLUID - These are the
actual hours that the QuinSyn fl uid
has been in the unit since the last
fl uid change.
j) HOURS ON MACHINE - This is
the total hours on the compressor
hourmeter.
k) SAMPLE DATE - The date that
the sample was taken from the
compressor.
NOTICE!
Items c) through k) are information
provided by the service person supplying
the fluid for analysis. Incomplete or
incorrect information will affect the
report’s accuracy.
l) EVALUATION - This is a brief
statement made by the technician
performing the actual fl uid analysis.
This statement addresses the
condition of the fl uid and fi lter. This
statement will also note any problems
that need attention.
m) PHYSICAL PROPERTIES RESULTS
- Particle size is measured in microns.
See Fluid Parameters on pages 48-
49.
n) SPECTROCHEMICAL ANALYSIS
- See Fluid Parameters on pages 48-
49.
57