Section III - Installation
Installing the Application Software
Simply load the CD into the PC and the
software will automatically load. The CD
icon will be visible on the desktop.
Connecting the PC to the Controller
Ensure that power to
controller is isolated.
Access the controller
by removing the screw
on the front panel and
removing the panel.
Using the lead
supplied, connect the
serial port connector
to the PC. (The RS232
connector is located
on the underside of
the controller.)
Remove the blanking
plug, taking care not to lose it, and
connect the RS232 connector with the
latch to the front of the dryer.
•
•
•
•
Energy Management and PC Interface
Interfacing the controller with a PC
The dryer controller has the ability to
interface with a PC. This gives the user
or the service engineer the opportunity
to interrogate the dryer to check the
following:
Operating stage times
Service warnings
Operating history
Alarm settings
Fault history
Fault and service history
Real Time displays
Setting Energy Management
Parameters – contact Quincy for details
PC Requirements
Controller Application software: Windows
95, Windows 98, Windows 2000, Windows
ME & Windows XP.
•
•
•
•
•
•
•
•
DIN Plug Detail
100 to 240 VAC
12 to 24 VDC
cover
cover
Quincy Compressor-QMOD
11
