Section I - General Information
The following safety guidelines must be
strictly observed:
Leave this manual at the place of
installation of the product.
It is essential that only Quincy or
their appointed agents carry out
maintenance and servicing work.
Users, maintenance and servicing
personnel must be familiar with
accident prevention regulations, safety
information (general and specific to
the unit), safety devices of the unit
and measures to be taken in case of
emergency
Allow only suitably trained persons to
be involved with installation, start-up,
operation, servicing and maintenance
of the product.
It is the responsibility of the installer to
ensure that the pipe work to and from
the dryer is suitable, in accordance with
applicable legislation and subject to
inspection and testing prior to being
put into service. All piping must be
adequately supported.
Before carrying out any maintenance or
servicing work the unit must be taken
out of operation. Users and others will
be exposed to risk if work is carried out
whilst the unit is running. This means
electrical disconnection plus isolation
from the compressed air supply and full
depressurization.
•
•
•
•
•
•
Only trained and competent persons
familiar with the electrical requirements
of the unit as laid out in this manual and
electrical safety rules and regulations
should be allowed to carry out work on
the electrical components and power
supply to the unit.
When carrying out any work on the unit,
use only correctly sized appropriate
tools in good condition.
Only use original spare parts and
accessories from the manufacturer.
There is no guarantee that non-
original parts have been designed and
manufactured to meeting the safety
and operational requirements of the
unit. Quincy assume no liability for any
equipment malfunction resulting from
the use of non-approved parts.
If carrying out installation work above
head height, use suitable and safe
working platforms or other means of
working access.
Do not make any constructional
changes to the product. Any changes
or modifications may only be carried
out by the manufacturer, Quincy.
Any faults or defects that could affect
safety must be put right fully before
using the unit.
Used items and materials must be
disposed of in the correct manner,
complying with local laws and
regulations, in particular the desiccant
cartridge.
•
•
•
•
•
•
•
Quincy Compressor-QMOD
