Section IV - Operating Procedures
If energy management is activated, the
‘Energy Management Active’ box will be
checked on the controller program screen.
The default delay is seconds.
If this setting is suitable for the application,
no further set up is necessary.
If the application requires dedicated
settings to be entered, follow the rest of
the instructions in this section.
The energy management feature can be
deactivated by unchecking the ‘Energy
Management Active’ box.
Alternatively, the DIN plug with jumper
link will override the energy management
feature providing it is left in place.
To modify the energy management
settings, select setup on the controller
display screen and proceed as follows:
Select dry or wet receiver from the set-up
screen by toggling in the appropriate box.
Quincy Compressor-QMOD
