manualshive.com logo in svg

Quincy Compressor QED-1250, Instruction Book, Page: 81 / 116

Share
Download
Quincy Compressor QED-1250 Instruction Book Download Page 81

• Use the checkbox Internet Protocol (TCP/IP) (1) (see picture). To avoid conflicts, de-select

other properties if they are selected. After selecting TCP/IP, click on the Properties button
(2) to change the settings.

• Use the following settings:

• IP Address 192.168.100.200
• Subnetmask 255.255.255.0

Click OK and close network connections.

Configuration of the web server

Configure the web interface

The internal web server is designed and tested for Microsoft® Internet Explorer 6, 7 and
8. Other web browsers like Opera and Firefox do not support this internal web server.
When using Opera or Firefox, a redirect page opens. Click on the hyperlink to connect
to the download server from Microsoft® to download the latest version of Internet
Explorer, and install this software.

• When using Internet Explorer:

Open Internet Explorer and click on Tools - Internet options (2).

Instruction book

2920 1992 00

79

Summary of Contents for QED-1250





















































































































Reviews:

No comments