USE & OPERATION (CONTINUED)
FUNCTION BUTTONS
Power
Connect the power adapter to the unit and to the electrical socket. Press the button to turn the
unit on. The unit will start automatically at low speed. To turn the unit off, press the button again.
Cool
Press the button to select Cool mode.
Please make sure the water tank is filled with water above the minimum level mark. Pressing the
COOL indicator light on the display screen activates evaporative cooling. The water pump will
operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.
Note:
When the cooling function is switched OFF, the unit functions in a fan only mode
(without evaporative cooling).
Speed
Press the button repeatedly to change the fan speed between - - - .
The indicator light will show the selected speed:
When AUTO is selected, the wind speed will gradually decrease and increase between the Turbo
and Quiet mode fan speeds.
Quiet/ Turbo Mode
Press the button to select either Quiet or Turbo modes. Quiet mode minimizes wind speed for lower
airflow. Turbo mode blasts wind at higher speeds for stronger airflow.
Timer
Press the button until the desired time duration setting is selected. When the set time has
passed, the unit will automatically turn off (unit remains in Standby mode until power cord is
unplugged from electrical socket). The TIMER function allows you to program the unit for up to 7.5
hours of use.
Swing
Press the button until the SWING indicator light is illuminated on
the display screen. The louvers will begin to move left to right automatically.
Louver
Movement
(Low)
(Medium)
(High)
(Auto)
EN
5
