4 Wheel Configurations.
1.25” 0 Washer (#7)
1.5” Bolt +
2 Washers
2.75” Bolt +
4 Washers
2.25” Bolt +
3 Washers
Right or Left
placement.
Wheel Holder(#4)
Wheel Bushing (#8)
Wing Nut
1.
Mount the Auger to the Blade Coupling
then tighten with Allen Wrench
2. Assemble Tip Blades and U-Blade
With the U-Blade against the left side of
Set Screws when looking from the front.
Tighten with Allen Wrench.
Short Blade
(#30)
Blade Coupling (#28)
Long Blade
(#30)
U-Blade (#31)
U-Blade positioned against the
Set Screws as shown.
Tip Blade and U-Blade
Install
Slide the Allen Wrench into the
Nozzle Holder to key on to the
Auger Barrel
The Nozzle Retainer is positioned
behind the Angled Nozzle.
Nozzle Holder
(#13)
Auger Barrel (#5)
Allen Wrench
Cap ,Nozzle Holder and Auger Barrel Assembly
Sandwich Long, Short &
U-Blade together and
insert into Blade-Coupling
Front
4” Bolt +
6 W5 Bushings
5
Oversized white bushings
in these positions.
Summary of Contents for Model 3
Page 10: ...8 ...
