SAFETY
WARNING
When using electric tools always follow basic safety precautions
to reduce the risk of fire, electric shock and personal injury.
Read and save all instructions for future use.
1.
KNOW YOUR POWER TOOL. Read this manual carefully and the drill manual, for the
drill, used with this Quikpoint Lightning Grouter.
2.
Do NOT PUT HANDS in hopper while tool is plugged in or connected to a DC Drill.
3.
Do not tighten or install parts while tool is plugged in or connected to a DC Drill.
4.
DO NOT USE WATER HOSE TO CLEAN TOOL. (see cleaning instructions)
5.
In THE EVENT that tool plugs or jams, do not continue to operate tool.
See trouble shooting.
6.
Before Operating tool, be sure nozzle Key Allen Wrench is inserted and locking
nozzle holder in place.
7. Do not use this tool to dispense materials other than water based cementacious mortars.
8.
Do not overreach. Keep proper footing and balance at all times.
9.
Do not abuse power cord. Never carry tool by the drill cord.
10.
Keep hands away from all moving parts.
11.
When not in use, store your tool in a dry secure place. Keep out
of the reach of children.
1 - Angled Steel Nozzle #12
1 - Scoop 16 oz #36
1 - Wheel Bolt Set #9
1 - Drill Mount 4” Ring Clamp #15A
1 - Drill Mount 3 1/4”Ring Clamp #15B
1 - 1/8” Allen Wrench Key #10
2 - 1.25” Wheel Washer #7
2 - 1/4” Wing Nut #21
1 - 5/16” Ring Clamp Tightener #34
1 - 7/16” Wrench #35
1 - Gibco’s MRF 8 oz #33
2 - 1/4 X28 x1/4“ Socket screw(for Blade coupling)
2 - Tip Blade Set (Long & Short Blade) #30
1 - U-Blade #31
ACCESSORIES PARTS
Summary of Contents for Model 3
Page 10: ...8 ...
