Quikpoint Model 3, Operator'S Manual

Page: 5 / 12

For ease of handling ,We recommend loading
the Grouter to a level no higher than the
Top of the yellow label.
Fill to about this level,
Approximately 3” from
edge of the opening.
The Grouter can also be supported
on something like a saw-horse to be
loaded etc.
Run a small amount
of material out to prime.
Adjust the Handle position
for best comfort.
Use the Ring-Clamp
Tightener (#34) to Secure
Draw the Grouter back in the joint.
Keep the Steel Nozzle slightly in the
joint
Dr
aw Back t
o fill Join
t.
Loading and Operation
Do not run the Drill too fast for best control.
To Load the Grouter, Use the included 16oz Scoop (#36).
Hold the Grouter as shown. We recommend elevating the
Mortar tray for easier loading.
3