Quicksilver 905WE, Owner'S Manual

Page: 85 / 87

Quicksilver 905WE — Maintenance
73
Dry the window with a soft cloth or chamois to prevent water spots. Polish with a separate cloth.
Don
’ t leave cleaners on for long periods; immediately wash the window. Finally, don ’ t apply cleaners
in direct sunlight or at elevated temperatures.
To minimize fine or hairline scratches apply a mild automotive polish and remove with a soft, clean
cloth. Do not use abrasive plastic polishes.
Tempered Glass Windshield
Use commercially available glass cleaners or a mixture of fresh water and vinegar to clean your glass
windows, windshield or portlights. Dry with a soft terry cloth towel or chamois.
DO NOT use abrasives, harsh chemicals, or metal scrapers
on glass.
Acrylic Windscreens & Windows
The use of a polycarbonate protective cleaner/restorer is recommended to keep your acrylic scratch
resistant, clean and minimize the deteriorating effects of sunlight.
To clean, rinse the windscreen/window thoroughly with clean water to remove any dust, dirt particles,
salt water or environmental agents before applying cleaning products. Use your bare hand, with
plenty of water, to feel and dislodge any stuck
- on dirt or foreign particles. This should be done
frequently to avoid build up of salt water, dirt and other environmental contaminants.
Using a soft non - abrasive cloth, wash windows inside and out with a mild soap and water solution.
Rinse completely with cool water. Do not use detergents. Blot dry with a soft cloth or chamois to
prevent water spots.
Never use a dry cloth or duster or glass cleaning solutions
on acrylic. DO NOT use solvents such as acetone, silicone
spray, benzine, carbon tetrachloride, fire extinguisher fluid,
dry cleaning fluid, lacquer thinner, glass cleaning solution or
harsh detergents on acrylic. These substances will attack the
surface of the acrylic.
Synthetic Decking Material
The synthetic deck material is stain resistant and most spills will clean up with warm soapy water (for
rapid stain removal, clean while stain is fresh). To clean, use an alkaline degreasing detergent used
with a stiff scrubbing brush, repeated as often as necessary. If a slight mark remains after a spill, sand
with 60 grit sandpaper, remember to follow the grain. This will remove any remaining marks. The deck
material may be power washed with or without detergent.
DO NOT coat the synthetic deck material with teak oil or
varnish. The material will not absorb fluids.