55
Quicksilver 905WE — System & Component Overview and Operation
28.
Sun Lounge (optional)
If equipped with the reclining aft cockpit seat, the L
-
lounge and the table, the cockpit can be
transformed into a sun lounge. To convert:
•
Move the aft cockpit seat forward to the middle cockpit position (a third seat position
specifically added for this option).
•
Rotate the backrest so that it lies flat.
•
Install the L
-
lounge filler board.
Note:
this is similar to the L
-
lounge bridge seat, but smaller. To
install:
•
Set the base into the slotted bracket on the outboard side of the deck.
•
Push the inboard side down so that it engages with the rubber stoppers.
Cockpit L
-
Lounge
Fixed base seat
Bridge seat base
Fixed base seat cushion
Bridge seat cushion
L
-
lounge seat backrest
Cockpit Sun Lounge
Cockpit table
Filler board
Filler board cushion
Sun lounge cushion
Sun lounge table leg
Summary of Contents for 905WE
