Quicksilver 905WE, Owner'S Manual

Page: 53 / 87

41
Quicksilver 905WE — System & Component Overview and Operation
Wear the lanyard at all times when operating the boat. Use
it to stop only in an emergency. DO NOT use it to shut off
the engine during normal operation
Emergency Engine Shutdown Switch
Ignition shutdown safety switch
Switch clip (attached to switch)
Lanyard
Switch clip (attached to operator)
On/resume button
Off button
Profile selection
Active trim keypad
Active Trim
15. SmartCraft
TM
System Gauges
The instrument package on your boat includes a SmartCraft
TM
tachometer and speedometer multi -
gauge system. By pressing the “mode” button on the gauge, specific information vital to the safe
operation of the vessel can be displayed. Refer to your SmartCraft
TM
gauge owner’s manual for
specific information on how to get the most out of the multi - gauge display.
In addition, Quicksilver® offers an optional factory installed GPS along with Mercury’s Vessel Link
system. If installed, the same engine data that you see on your SmartCraft
TM
gauges can be displayed
on your GPS. Refer to the GPS owner’s manual for more specific information regarding instructions
and warranty.
16. Active Trim (optional)
Your boat may come equipped with the Active Trim system from Mercury. Active Trim automatically
adjusts the engine trim based on boat speed to optimize performance and fuel economy. The system
allows for the owner to either use the default system programmed, or create their own trim profile.
At anytime the user can override the automatic trim system by simply pressing the trim button on the
shifter.
The Active Trim keypad is located on the starboard side of the dash below the shifters. Refer to the
manufacturer’s manual for complete instructions and warranty.