7
Press [
▲
] or [
▼
] to select ON/OFF and press [ENTER] to confirm.
3). Time and Date: Set time and date.
Choose [Time and Date] and press [ENTER], the screen will display the interface as shown below:
Press
[▲
] or
[▼
] to change input, press [LEFT] or [RIGHT ] to select position, then press [ENTER] to confirm.
4). Record: ON/OFF the Record.
Choose [Record] and press [ENTER], the screen will display the interface as shown below:
Press [
▲
] or [
▼
] to select ON/OFF and press [ENTER] to confirm. When this function is ON, and the icon record
Datastream and record Freeze Frames.
3.6 Vehicle Coverage
The AUTO SCANNER is specially designed to work with all OBD II compliant vehicles, including Control Area Network
(CAN). It is required by EPA that all 1996 and newer vehicles (cars and light trucks) sold in the United States must be OBD
II compliant and this includes all American, Asian and European vehicles.
A small number of 1994 and 1995 model year gasoline vehicles are OBD II compliant. To verify if a 1994 or 1995 vehicle is
OBD II compliant, check the Vehicle Emissions Control Information (VECI) Label, which is located under the hood or by
the radiator of most vehicles. If the vehicle is OBD II compliant, the label will designate “OBD II Cetifiedregulations
mandate that all OBD II compliant vehicles must have a “comon”.For the vehicle to be OBD II compliant it must have a
16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the
vehicle is OBD II compliant.
4. OPERATION
4.1 Connection
1). Turn the ignition off.
2). Locate the vehicle
3). Plug the OBDII cable into the vehicle
4). Turn the ignition on. Engine can be off or running.
After finishing, press [ENTER] button to enter Main Menu as following picture:
CAUTION: Don’t onnect or disconnect any test equipment with ignition on o engine running.