11
You can use
[▲
]
[▼
] button to select single data stream items to view item of live data with a graph, and press [ENTER]
button, the screen will display the interface as shown below:
Press [ESC] to return to Diagnostic Menu.
You can view all data stream items or select a certain item of live data with a graph.
4.2.5 View Freeze Frame
When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This
information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an
emission-related fault.
Note: if DTCs were erased, Freeze Data may not be stored in vehicle memory depending on vehicle.
Select [Freeze Frame] in main menu interface, the screen will display the interface as shown below:
You can use [LEFT] [RIGHT] button to view the data.
Press [ESC] to return to Diagnostic Menu.
4.2.6 O2 sensor test
The results of O2 sensor test are not live values but instead the results of the ECUlive sensor screens such as Graph
Screen.
Not all test values are applicable to all vehicles. Therefore, the list generated will vary depending on vehicle. In addition,
not all vehicles support the Oxygen Sensors screen.
For results of latest mandated on-board oxygen sensor monitoring test, see the below:
Select [O2 Sensor Test] in Diagnostic menu and press [ENTER] and the screen will display as shown below
Press [ENTER] button, the screen will display as shown below: