12
You can use
[▲
]
[▼
] button to select an item and press [ENTER], the screen will display as shown below:
Press [ESC] to return to Diagnostic Menu.
4.2.7 On-board monitor test
This function can be utilized to read the results of on-board diagnostic monitoring tests for specific
components/systems.
Select [On-board Monitoring] in main menu and press [ENTER] and the screen will display as shown below:
You can use
[▲
]
[▼
] button to select an item and press [ENTER], the screen will display as shown below:
Press [ESC] to return to Diagnostic Menu.
4.2.8 EVAP System Test
The EVAP test function lets you initiate a leak test for the vehiclesystem. The AUTO SCANNER does not perform the leak
test, but signals to vehiclefunction, refer to the vehicleprocedures necessary to stop the test.
Select [EVAP System Test] and press [ENTER], the screen will display the relative information about EVAP system. Some
vehicle manufacturers do not allow external devices to control vehicle system. If the car supports this function, it will
display as below:
4.2.9 Vehicle Info
Select [Vehicle Info] and press [ENTER], the screen will display the information, such as VIN (Vehicle identification
Number), CID (Calibration ID) and CVN (Calibration verification number), as shown below:
Press [ESC] to return to Diagnostic Menu.