QuickLabel Systems pronto! 482, User Manual

Page: 242 / 256

16-8 Error treatment
Out of paper Label roll used up Load a label roll (see
Loading labels from a roll
on page 6-3) or
Load fanfold labels (see
Loading fanfold labels on
page 6-9).
Error in paper course Check paper course.
Out of ribbon Transfer ribbon used up Load new transfer ribbon
Transfer ribbon melted
through during printing Cancel print job.
Change heat level via
software.
Clean printhead (see
Cleaning the printhead on
page 11-5).
Load transfer ribbon
(
Loading transfer ribbon on
page 6-10).
Restart print job.
Thermal paper labels are
to be used, but the
software is set to transfer
printing Cancel print job.
Switch to direct thermal
printing in the software.
Restart print job.
Supply roll of transfer
ribbon not secured to
ribbon supply hub Secure transfer ribbon
(see
Loading transfer
ribbon on page 6-10).
Protocol error Printer receives an
unknown or incorrect
command from the
computer. Press the pause button to
skip the command or
Press the
cancel button to
cancel the print job.
Read error Read error when
accessing memory card Check data on memory
card.
Save data.
Reformat card.
Error message Cause Error recovery