QuickLabel Systems pronto! 482, User Manual

Page: 106 / 256

8-16 Accessories
External Rewinder (ER4)
Intended Use
• The device is manufactured in accordance with the current technological
status and the recognized safety rules. However, danger to the life and
limb of the user or third parties and/or damage to the device and other
tangible assets can arise during use.
• The device may only be used for its intended purpose and if it is in
perfect working order, and it must be used with regard to safety and
dangers as stated in the operating manual.
• The device is intended exclusively for rewinding suitable materials that
have been approved by the manufacturer. Any other use or use going
beyond this shall be regarded as improper use. The manufacturer/
supplier shall not be liable for damage resulting from unauthorized use;
the user shall bear the risk alone.
• Usage for the intended purpose also includes complying with the
operating manual, including the manufacturer‘s maintenance
recommendations and specifications.
Safety Instructions
The device may only be used in a dry environment, do not expose it to
moisture (sprays of water, mists, etc.).
Note: This accessory is compatible only with the Pronto! 482 and 486 models.
Warning: During operation, the rotating rewinder axle with the flange or
plate mounted upon it is freely accessible. When working on the device wear
tightly fitting clothes and tie up long hair. Loosely hanging pieces or long hair
can get caught in parts of the device.
Attention: Switch off the device in case of changing the turn direction.
Warning: Do not try to manipulate or repair parts that are not described in
the manual of the external rewinder or the printer.