Attach the tail pitch lever to
the tail pitch lever base using
an M3x10 cap head screw.
Be sure that you capture the
M3x4 pivot stud in the tail
pitch slider with the brass
coupler in the tail pitch lever.
Attach the tail rotor ass’y to
the tail output shaft using an
M3x3 set screw.
Install a shim ball onto each
blade grip using an M2x8
pan head screw. They
should go in the outmost
holes.
Attach a tail blade to each
grip using (2) tail blade
spacers, an M3x20 cap head
bolt, and an M3 locknut.
Note: The Tail Blades should
rotate counter clockwise
when looking at the right
side of the Tail Case.
