Attach the side plate to the
boom using two M3x6 cap
head screws. Next slide your
tail output and shaft through
the side plate.
Attach the other tail case side
plate to the tail boom using
(2) M3x6 cap head screws.
Also attach the tail case cross
member using (2) M3x6 cap
head screws.
Locate your tail pitch slider,
(2) medium ball ends, and an
M3x4 pivot stud.
Slide the tail pitch slider
assembly onto the tail output
shaft.
Attach the M3x4 pivot stud
to the tail pitch lever.
