background image

4

CHARACTERISTICS AND INSTALLATION

GB

RRC R902/12 - REV001A

RRC RADIO CONTROL RECEIVER

The RRC radio control receiver is a device which combined with an RRC radio transmitter is suitable for 
controlling the operation of devices or accessories installed on recreational crafts.

The RRC radio system is a generic radio control whose failed operation must not cause damage to people, 
animals or property.

The advantages offered by the RRC radio receiver are:

• Full supply range (from 10.5 to 31Vdc).
• Microcontroller-operated functions.
• FSK modulation and carrier frequency 913.7 Mhz.
• Operating temperatures from -15°C to +70°C.
• Indication of the system operating status, errors and problems by means of LED and seven-segment display.
• Protection against polarity inversion.
• Protection against the discharge of the battery.
• 50 transmitters can be stored.
•  Translation mode to activate more receivers, installed in different spots, by means of one transmitter.
• Programmable digital filter.
• Two functions can be activated at the same time.
• Possible connection to an external antenna.

INSTALLATION

The installation of RRC receiver must be carried out by qualifi ed personnel.

BEFORE USING THE RADIO RECEIVER, CAREFULLY READ THIS USER MANUAL. IN CASE OF DOUBTS 
PLEASE CONTACT THE RETAILER OR QUICK

®

 CUSTOMER SERVICE.

This device was designed and constructed for use on recreational crafts. 
Other forms of use are not permitted without written authorization from the company Quick

®

.

The RRC radio receiver has been designed and manufactured for the purposes described in this user manual. 
Quick

®

 is not liable for direct or indirect damages caused by an improper use of the radio control, due to an 

incorrect installation or errors possibly present in this manual.

If the RRC radio receiver is to be installed on boats that are approved or classified according to interna-
tional laws or national specifications, the installer is responsible to complete requests according to these 
provisions/classifications. 
Instructions contained in this manual do not guarantee abide and satisfy these provisions/classifications.

THE PACKAGE CONTAINS

:

 radio receiver - conditions of warranty - the present manual of installation and use.

F

Summary of Contents for R902





















Reviews: