Quick CHC1103, Manual Of Installation And Use

Page: 36 / 64

36
CHC1103 IT EN FR - REV001A
EN
SETTING THE CHAIN COUNTER
SETTINGS MENU - UTILITY - DEVICE INFO
This function allows viewing the version of the software installed on the device, as well as
serial number, week and year of production.
DEVICE INFO
SW VERSION
S/N: XXXXX/YYZZ
SETTINGS MENU - UTILITY - SET DEFAULT
This function allows the user to enter the default values and RESTART the chain counter.
YES or NO can be entered.
SET DEFAULT
ARE YOU SURE?
YES NO
In order for the chain counter to operate properly the two values must match.
SETTINGS MENU - UTILITY - CHECK FLASH (program memory)
This function shows the calculated FLASH memory checksum (SUM) and the one stored dur-
ing production (TRUE).
SETTINGS MENU - UTILITY - CONTROL EEPROM (data memory)
This function shows the calculated EEPROM memory checksum (SUM) and the one stored
(TRUE).
SETTINGS MENU - UTILITY - CAN MESSAGE
This function shows some information regarding CAN messages transmission state.
SETTINGS MENU - CAN CONFIGURATION
These options allow setting CAN priority and CAN bus interface speed.
SETTINGS MENU - CAN CONFIGURATION - CAN PRIORITY
This option allows the user to determine chain counter’s priority in the CAN network
(see chapter MULTIPLE CHAIN COUNTERS).
SETTINGS MENU - CAN CONFIGURATION - CAN BIT RATE
This option allows setting the communication speed of the CAN bus interface.
After setting, turn off and on again the instrument.
CHECK FLASH
CHECK FLASH
TRUE: XXXX
SUM: YYYY
CHECK EEPROM
CHECK EEPROM
TRUE: XXXX
SUM: YYYY
CAN MESSAGE
TX MSG: 000
RX MSG: 000
LAST ID: 000
CAN UPD: 000
CAN CONFIG
CAN PRIORITY
CAN BIT RATE
EXIT
CAN PRIORITY
SET VALUE:
MASTER SLAVE
CAN BIT RATE
SET VALUE:
62.5 KBPS
In order for the chain counter to operate properly the two values must match.
MASTER and SLAVE can be entered (default: MASTER).
Selectable values: 62.5 - 125 - 250 Kbps (default: 62.5 Kbps)
Where XXXXX is the serial number, YY is the week of production
and ZZ is the year the chain counter was produced.