30
CHC1103 IT EN FR - REV001A
EN
WINCH MODE
This mode must be used when carrying out winch operations with the windlass. In this configuration the mechanism that
moves the chain (gypsy) remains stationary while the drum can still turn.
To use the windlass for winch operations consult relative user manual.
ATTENTION:
use this mode only if the windlass is configured for winch operations.
ATTENTION:
in this mode the automatic down function is blocked, the up alarm function is deactivated and the
count is not updated.
Once activated the winch mode, the following window is displayed:
To select direction of drum rotation press the
p
(UP) or
q
(DOWN) button. Hold the button
down until the operation is complete, then release the button.
While
p
(UP) or
q
(DOWN) button is pressed, the instrument will display a window like this:
If the instrument is turned off in winch mode, when turned on again it will display the speed
of chain movement.
STOP
WINCH
STOP
ACTIVATED
WINCH
MONITORING
The information given on the monitor line can be edited by pressing (the monitoring line will start to flash) and releasing
button
=
(SELECT) within 1 to 3 seconds.
The following data can be displayed: chain speed, supply voltage and winch.
STOP
35.3
M
BATTERY
12.8V
STOP
STOP
35.3
M
SPEED
0M/M
STOP
The precision of the supply voltage reading is ± 1% accurate.
The precision of the chain speed reading is ±1% accurate.
STOP
WINCH
STOP
TURNING THE TORCH ON AND OFF
Press and release button
=
(SELECT) in less than one second to turn on the torch. Press and release button
=
(SELECT)
in less than one second to shut off the torch.
When the instrument is turned on, the torch is always off, even if the instrument was shut off from the power supply with
the torch turned on.
CHAIN COUNTER OPERATION
Summary of Contents for CHC1103
