2
Ⅰ
. Safety Instruction
CAUTION
When the power is on, the tip’s temperature is very high. The mishandling may lead to burns or fire, be sure to
comply with the following precautions:
Please avoid an abuse of the unit and use the appliance only as the described manner.
Do not touch the metallic parts near the tip.
Do not use the product near flammable items.
Advise other people in the work area that the unit can reach a very high temperature and should be considered
potentially dangerous.
While replace parts or install tips, turn the power off and allow the unit to cool to room temperature.
To prevent damage to the unit and ensure a safe working environment, be sure to comply with the following
precautions:
Appliance shall only be used with rated voltage and frequency. (Refer to the trademark back of equipment.)
Don’t use the appliance if it is damaged, especially the supply cord.
This machine is equipped with a 3-wires grounding plug and must be plugged into a 3-terminal grounded
socket. Do not modify plug or use an ungrounded power socket. If an extension cord is necessary, use only a
3-wire extension cord that provides grounding.
Do not use the unit for other applications except soldering.
Only use genuine replacement parts.
Do not wet the unit. When your hands are wet, don’t use and disconnect the unit, or to pull the supply cord.
The soldering process will produce smoke, so make sure the area is well ventilated.
While using the unit, don’t do anything which may cause bodily harm or physical damage.
