4
Tip to Ground Potential
＜
2 mV
Dimension (W×H×D)
137×168×114mm
Weight
2 Kg
Suggestion thermometer is QUICK 191/192.
Ⅴ
. Setting & Operating the Soldering Station
CAUTION: The supply voltage is consistent with the unit!
5.1 Iron Holder and Sponge
CAUTION:
The sponge is compressed. It will swell when moistened with water. Before using the station, moisten
the sponge with the water and squeeze it dry. Failure to do so may result in damage to the soldering tip.
If the sponge becomes dry during working, add appropriate water.
1.
Dampen the cleaning sponge with water and then squeeze it dry.
2.
Place it in groove of the iron holder base.
3.
Add a little water to holder base. The sponge will absorb water to keep the sponge around it wet at all times.
5.2 Connection
CAUTION:
Be sure to turn off the power switch before connecting or disconnecting the soldering iron.
1.
Connect handle cord to the handle socket (4).
2.
Place the soldering iron into the iron holder.
3.
Connect power plug to power supply socket (6).
4.
Connect ESD socket (7).
5.3Turn on/off
1.
Turn on the power switch (5).
2.
Press and hold “POWER” button for 3s to enter main menu.
Soldering iron holder
Sponge
Holder base
