background image

 

13

3)

 

Under  high  temperature,  the  solder  in  tip  will  produce  oxide,  which  will  damage  its  heat 

conduction. Turn off the heating controller when not use.     

Prolong the lifetime of soldering tip 

1)

 

Coat the soldering tip with solder to prevent oxide.   

2)

 

Set the temperature as per application but as low as possible.   

3)

 

Choose the right type of soldering tip.   

4)

 

The plating would be broken if the tip is bent. Do not use the soldering tip as a detecting tool. 

5)

 

Activated rosin will corrode the tip plating. Choose the solder wire with less activated rosin.   

6)

 

Do not press the soldering tip. Much pressure is not helpful for heat conduction. Melt the solder 

wire to create a solder bridge between tip and point, to speed up heat transfer. 

 

.Error messages 

Various error messages will be displayed when there is something wrong with the unit. 

  “Sensor broken”:    sensor open a way   

  “Handle type”: handle type wrong       

“NO handle ”

handle is not insert 

“sensor shorten”

sensor short circuit             

  “Heater broken”

heater element open a way (Tip low temperature alarm)     

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for TS2300C
















Reviews: