2
2
·Mounting location :Ceiling or wall
·Sound Pattern：ISO8201(BI 0.5s-pause 0.5s-BI 0.5s-pause
0.5s-BI 0.5s-pause 1.5s, with the RED LED flashing, repeat this
alarm pattern)
·Comply with：AS3786:2014
Warnings:
·To prevent injury, this apparatus must be securely attached
to the ceiling/wall in accordance with the installation
instructions.
·Batteries should not be exposed to excessive heat such as
sunshine, fire or the like.
·Do not paint or cover the smoke alarm.
Installation Instructions
By law at least one smoke alarm must be installed on
each level of your home (
Figure 1B
).
Recommended Locations
•
In every room where someone sleeps with the door
closed. The closed door may prevent an alarm located
outside from waking the sleeper.
•
In the immediate area of bedrooms and the exit path
from all sleeping areas (Figure 1A).
•
In stairways, as stairways act like chimneys for smoke
and heat.
•
In any room where large electrical appliances are
operated (e.g., portable heaters or humidifiers).
•
If a hallway or room is more than 9.1m long put alarms
at both ends.
•
For maximum household protection see Figure 1C.
Things to Consider:
For Ceiling Mounting:
Smoke from a fire will rise to the ceiling and spread
horizontally. Mounting the smoke alarm in the centre of
the ceiling places it closest to all points in the room.
•
When mounting an alarm on the ceiling, locate it at a
minimum of 50cm from the side wall (Figure 2A).
Refer to your local state and federal laws or contact your local fire
brigade to determine the minimum installation requirements.
Summary of Contents for Simline QSP10
Page 9: ...8 Installation 2 ...
Page 13: ...12 2 Operation ...
