15
In addition to weekly testing, the alarm requires periodic
cleaning to remove dust, dirt, and debris.
Clean the alarm at least once a month to remove dust, dirt, or
debris.
Use a vacuum cleaner with the soft brush, vacuum all sides
and covers of smoke alarm device.
This alarm has a low battery monitor which will cause the alarm
to “chirp” approx every 40 seconds and the red LED flash once
at the same time for a minimum of thirty days when the battery
gets low.
If there is a defective battery or other failures, you can refer to
“Trouble shooting” for solution, if there are still failures during
warranty, you can return to your retailer.
WARNING:The battery is sealed in cover and not replaceable.
Please replace another new alarm if the low battery chirp occurs.
IMPORTANT:
Do not attempt to remove the cover to clean inside.
This will affect warranty.
Maintenance
2
Summary of Contents for Simline QSP10
Page 9: ...8 Installation 2 ...
Page 13: ...12 2 Operation ...
