background image

                                                                                                                                             

Smart  Module  Series 

                                                                                                                        SC606T  Series  Hardware  Design

 

 

 

SC606T_Series_Hardware_Design                                                                                                      1  / 116

 

 
 
 

 

Our  aim  is  to  provide  customers  with  timely  and  comprehensive  service.  For  any  assistance, 

please contact our company headquarters: 

 

Quectel Wireless Solutions Co., Ltd.   

Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai 

200233, China   

Tel: +86 21 5108 6236           

Email: [email protected]

 

 

Or our local office. For more information, please visit:   

http://www.quectel.com/support/sales.htm. 

 

For technical support, or to report documentation errors, please visit:   

http://www.quectel.com/support/technical.htm   

Or email to [email protected].   

 

General Notes 

Quectel  offers  the  information  as  a  service  to  its  customers.  The  information  provided  is  based  upon 
customers’ requirements. Quectel makes every effort to ensure the quality of the information it makes 
available.  Quectel  does  not  make  any  warranty  as  to  the  information  contained  herein,  and  does  not 

accept  any  liability  for  any  injury,  loss  or  damage  of  any  kind  incurred  by  use  of  or  reliance  upon  the 

information. All information supplied herein is subject to change without prior notice.   

 

Disclaimer   

While  Quectel  has  made efforts  to  ensure  that  the functions  and  features under development  are  free 

from  errors,  it  is  possible  that  these  functions  and  features  could  contain  errors,  inaccuracies  and 

omissions.  Unless  otherwise  provided  by  valid  agreement,  Quectel  makes  no  warranties  of  any  kind, 

implied or express, with respect to the use of features and functions under development. To the maximum 

extent permitted by law, Quectel excludes all liability for any loss or damage suffered in connection with 

the use  of  the  functions  and  features under development,  regardless  of  whether  such  loss  or  damage 

may have been foreseeable.     

 

Duty of Confidentiality 

The  Receiving  Party  shall  keep  confidential  all  documentation  and  information  provided  by  Quectel, 

except when the specific permission has been granted by Quectel. The Receiving Party shall not access 
or use Quectel’s documentation and information for any purpose except as expressly provided herein. 
Furthermore, the Receiving Party shall not disclose any of the Quectel's  documentation and information 

to  any  third  party  without  the  prior  written  consent  by  Quectel.  For  any  noncompliance  to  the  above 

requirements, unauthorized use, or other illegal or malicious use of the documentation and information, 

Quectel will reserve the right to take legal action. 

Summary of Contents for SC606T Series

























































































































Reviews: