Automotive Module Series
AG521R-NA QuecOpen
Hardware Design
AG521R-NA_QuecOpen_Hardware_Design 11 / 104
Band
LTE BAND 2
8.00
8.00
LTE BAND 4
8.00
8.00
LTE BAND 5
5.00
5.00
LTE BAND 7
8.00
8.00
LTE B12
5.00
5.00
LTE B13
5.00
5.00
LTE B14
5.00
5.00
LTE B25
8.00
5.00
LTE BAND 26(814-824)
8.00
8.00
LTE BAND 26(824-849)
8.00
8.00
LTE B66
5.00
5.00
LTE B71
5.00
5.00
5. This module must not transmit simultaneously with any other antenna or transmitter
6. The host end product must include a user manual that clearly defines operating requirements and conditions that
must be observed to ensure compliance with current FCC RF exposure guidelines.
For portable devices, in addition to the conditions 3 through 6 described above, a separate approval is
required to satisfy the SAR requirements of FCC Part 2.1093
If the device is used for other equipment that separate approval is required for all other operating configurations,
including portable configurations with respect to 2.1093 and different antenna configurations.
For this device, OEM integrators must be provided with labeling instructions of finished products.
Please refer to KDB784748 D01 v07, section 8. Page 6/7 last two paragraphs:
A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently
affixed label, the module must be labeled with an FCC ID - Section 2.926 (see 2.2 Certification (labeling
requirements) above). The OEM manual must provide clear instructions explaining to the OEM the labeling
requirements, options and OEM user manual instructions that are required (see next paragraph).
For a host using a certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible when
installed in the host, or (2) if the host is marketed so that end users do not have straightforward commonly used
methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent
label referring to the enclosed module:
“Contains Transmitter Module FCC ID: XMR2021AG521RNA” or
“Contains FCC ID: XMR2021AG521RNA”
must be used. The host OEM user manual must also contain clear
instructions on how end users can find and/or access the module and the FCC ID.
The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for
unintentional radiators in order to be properly authorized for operation as a Part 15 digital device.
The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that
changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as
on a computer disk or over the Internet, the information required by this section may be included in the manual in
that alternative form, provided the user can reasonably be expected to have the capability to access information in
that form.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the
