LTE Standard Module Series
EC25 Hardware Design
EC25_Hardware_Design 40 / 130
Hardware:
The W_DISABLE# pin is pulled up by default. Driving it to low level will let the module enter airplane
mode.
Software:
AT+CFUN
command provides the choice of the functionality level through setting
<fun>
into 0, 1 or 4.
AT+CFUN=0:
Minimum functionality mode. Both (U)SIM and RF functions are disabled.
AT+CFUN=1:
Full functionality mode (by default).
AT+CFUN=4:
Airplane mode. RF function is disabled.
1. The W_DISABLE# control function is disabled in firmware by default. It can be enabled by
AT+QCFG="airplanecontrol"
command, and this command is under development.
2. The execution of
AT+CFUN
command will not affect GNSS function.
3.6. Power Supply
3.6.1. Power Supply Pins
EC25 provides four VBAT pins for connection with the external power supply. There are two separate
voltage domains for VBAT.
Two VBAT_RF pins for module’s RF part
Two VBAT_BB pins for module’s baseband part
The following table shows the details of VBAT pins and ground pins.
Table 6: VBAT and GND Pins
Pin Name
Pin No.
Description
Min.
Typ.
Max.
Unit
VBAT_RF 57,
58
Power supply for module’s RF
part
3.3 3.8 4.3
V
VBAT_BB 59,
60
Power supply for module’s
baseband part
3.3 3.8 4.3
V
GND
8, 9, 19, 22, 36,
46, 48, 50~54,
56, 72, 85~112
Ground -
0
-
V
NOTES
