RAZ-WR96 HOOKUP GUIDE
Option 2
Cut Stri p a nd use
8MM-EZ
connector
5. Cut the connection wire to desired length and route to
LED strip location. Strip wire back 3/16" and insert into the
Female barrel connector terminals. (Red to
+
and Black to -)
Tighten screws down with Philips screwdriver
5. Route wire from receiver barrel plug to LED strip. Connect
to strip using Option 1 or Option 2. (See the 8MM-EZ guide
for detailed cutting and connecting instructions)
7. Verify that all connections polarity are correct
(Red to
+
and Black to -}
9. Plug in the power supply and proceed to the
pairing instructions
8. Connect the male end of the power supply to the
Female plug cable.
Watch the Video
www.veraled.com
7
8
9
