Quattro RazorLED RAZ-WR96 Hook-Up Manual Download Page 2

Page: 2 / 4

RAZ-WR96 HOOKUP GUIDE

1. Remove cover with Phillips screwdriver.

Pre-installation

2. Loosen the 4 flat head terminal screws using the

flat blade screwdriver. Connect the male and
female plug cables, or connection wire. Tighten 4
screws. (+Red wire) (- Black wire)

3. Attach cover with Phillips screwdriver.

Do not over tighten.

4. Attach the female barrel connector to the male

plug cable. Push together to make the connection.

Tools required

(±)

Wire

Strippers

Flat Blade

Screwdriver

Philips

Screwdriver

Summary of Contents for RazorLED RAZ-WR96

Page 1: ...l the receivers in the same zone like zone 1for example or 2 have each receiver s in a different zone like Zone 1 2 3 or 4 2 In order for each receiver to know what Zone it belongs to you will need to...

Page 2: ...ade screwdriver Connect the male and female plugcables orconnectionwire Tighten4 screws Redwire Blackwire 3 Attach cover with Phillips screwdriver Donotovertighten 4 Attach thefemale barrel connector...

Page 3: ...n screws down with Philips screwdriver 5 Routewirefrom receiver barrelplugtoLEDstrip Connect to strip using Option 1 or Option 2 See the 8MM EZ guide fordetailedcuttingandconnectinginstructions 7 Veri...

Page 4: ...se In ordertodothis youneedtopoweruptheunitwiththe LED lights hooked toit 3 Reset the receiver by pressing and holding the Learning button until the lights blink 2 times 4 To pair you need to quickly...