one zone
PAIR ING INSTRUCTIONS
After you have wired all the receivers according to your project requirements, do the following:
1. If you use multiple receivers, you have two choices
:
(1 )
have all the receivers in the same zone, like zone 1, or
(2)
Have each receiver in a different zone, like zone 1, 2, 3 or
4.
2. In order for each receiver to know what Zone it belong to,
you will need to "pair " it to the zone you wish to use. In
order to do this, you need to power up the unit with the
LED
lights hooked to it.
3. Reset the receiver by pressing and holding the
"Learning"
button until the lights blink
2 times
.
4. To
"pair"
you need to quickly and firmly press and release
the
"Learning"
button on the receiver and immediately after
that, you will need to quickly press and release the
ON
and
OFF
button on the RAZ-Q4RF control for the zone you want
to use.
Watch the Video
5. Once you do that, the lights will blink once.
Now your
Remote
and
Receiver
are
paired.
3
4
1
Option 1
All
receivers in
Option 2 each receiver i n different zones
2
5
