Q-Controller System Operation Manual
- 33 -
86550-001-000 Rev B
5.3.8
Scheduler Setup
Q-Controller supports up to 8 schedulers on-board. Scheduler is used as a periodic
schedule of events that may repeat within a range of dates/time.
Click any scheduler list item will enter scheduler configuration screen.
Sensor
Description
Enable/Disable
Q-Controller only monitor and control enabled devices
Description
Description for this scheduler
Frequency
•
Only Once: The scheduler only works once
•
Every Weekday: The scheduler works on weekday
•
Every Weekend: The scheduler works on weekend
•
Every day: The scheduler works everyday
Start Time
The assigned outputs will be actuated from the time
End Time
The assigned outputs will be reset from the time
Assigned Output
Define which outputs the scheduler will trigger and actuate to.
