QUATRO
HU315
10
QUATRO
-------------------------------------------------------------------------------------
”We Make Clean Air”
30 Hymus Boulevard, Montreal, Quebec, H9R 1C9 Tel.: (514) 630-4444 Fax: (514) 630-4454 website: www.quatro-air.com
Installation
Positioning
The HU315 has been designed for wall mounting (although it can be placed on a stand) and, since it is an
atmospheric steam humidifier, should be placed close to the point where the steam will be used, to minimize
the steam hose length (and condensate).
Certain clearances must be maintained around the unit:
Mounting
Removing the front cover
The front cover is secured by a capture screw located underneath the QUATRO
logo. Twist the QUATRO logo to reveal the screw, and use a phillips head
screwdriver to remove it. Then simply lift the front cover and pull out to remove
it. Return it in reverse order.
Fastening to the wall
Using the screws and anchors supplied, fasten the mounting bracket to the wall.
Be sure that the screws anchor firmly into studs or supports. Note the unit
installed weights from the Positioning section.
Once the mounting bracket is secured to the wall, hang the unit on the bracket. Fasten the remaining capture
screws through the bottom holes in the unit to secure it to the wall.
A
B
C
D
Minimum
dimension
(inches)
20
72
72
24
