QUATRO
Air Technologies Inc.
------------------------------------------------------------
We Make Clean Air
----------------------------------------------------------
30 Hymus Boulevard, Montreal, Quebec, H9R 1C9 Tel.: (514) 630-4444 Fax: (514) 630-4454 website:
Replacement Filter Part Numbers
Qty
Description
Part No.
Filter Stage
1
Anti Microbial Bag Filter (5 Pack)
AG128
Stage 1
1
Hi Cap Filter (2 Pack)
F073-BX
Stage 2
1
HEPA Filter
F074
Stage 3
1
Odor Filter (Most Applications)
AG111
Stage 4
1
Odor Filter Refill Kit
AG174
Stage 4
1
Odor Filter (Rubber Stamp Applications)
AG094
Stage 4
1
Gel Repair Kit
AR020
N/A
1
Gel Replacement Kit
2 X AR020
N/A
1
Replacement filter 6x6” dust pads (2 pack)
AG269
N/A
The Quatro System can be equipped with many filter sequences. The filters shown on the above table are the most popular
general filter sequence that work in most applications. Verify the filters in your Quatro System for the correct part numbers
before ordering.
General Filter Maintainence Guide:
Stage
Filter
Reccomended Filter Change Interval
“Basic” Panel With Pressure
iSeries Control Panel
1
Anti Microbial Bag Filter
Every 3 Months
“Service Filters” ON
“Service Filters” Flashing
2
Hi Cap
Every 6 Months
None
None
3
HEPA
Every 6-18 Months
“Service Filters” ON
“Service Filters” Flashing
4
Odor
Every 6-18 Months
None
“Service Filters” ON
7- MOTOR SERVICE & REPLACEMENT
LED Diagnostic Table -
“Service Motor(s)” Alerts
If “Service Filter(s)” alert is ON SOLID the motor(s) need to be serviced or replaced.
MOTOR ACCESS
WARNING: Switch unit off and unplug power cord from wall before servicing the motor(s).
For “Quick Change” & “Infinity” Brush motors, the motors are accessed through the lower side access door.
For “Brushless” motors, the motor is accessed through the bottom access panel (not pictured).
REMOVE ALL FILTERS BEFORE TURNING THE UNIT OVER TO ACCESS THE MOTORS.
“Infinity” Brush Motor
Brushless Motor
Determine which type of motor your system has installed and follow the service or replacement instructions.
“Infinity” & Brushless motors must be replaced at the end of their service life.
“Infinity” & Brushless Motors Are Considered Consumables And Will Not Be Changed Under Warranty Unless Found To Be
DEFECTIVE Within The Warranty Period.
Consumed Brushes
On “Infinity” Motors Are Not Covered under Warranty.
Infinity Curved
Motor Brush
Motor Access
Door For
“Quick Change”
& “Infinity” Brush
Motors
