31
16.) Working with the sequenzer
A sequencer-multi-setup will be activated as follows:
Function
User action
(Dials/Keys)
Display-Message
Selection of „Write/Dump“ menu.
1.) Press „EDIT/OK“ key.
2.) Use one of the dials to select the
menu.
\Edit/Function
<8>\Write/Dump..
Selection of „Load Setup“ menu. If
not already in sequencer mode, this
mode will be activated when a setup
is loaded.
1. Press „EDIT/OK“ key.
2. Use the „PARAMETER/
SOUNDGROUP“ dial to get to
„Load Setup“ menu.
<2>\Load\Setup?
Yes<OK>\No<EXIT>
Confirm Selection.
Press "EDIT/OK" Key
Load\14\Untitled
Yes<OK>\No<EXIT>
Select one of the 14 setups.
1.) Use "VALUE/SOUND"-Dial to
select one setup.
2.) Confirm selection with
"EDIT/OK" key.
<2>\Load\Setup?
\\\\\\\\\\\ok!
Exit the "WRITE"-Menu.
Press „EXIT“ key until you reach the
main page.
\T_e_c_h_n_o__x
13:A001:\_303Lead
Enabling the setup-loading by using program change informations received via MIDI is simply done by
going into the „Edit System“ menu and setting the „RxSetupC“ (Receive Setup Change) parameter to
„ON“. Please note that it further won’t be possible to receive any program change informations for the part
that is identical to the selected MIDI system channel when RxSetupC is set to „ON“. Program changes can
be received on all other 15 parts.
Setup loading via MIDI will be enabled by doing the following:
Function
User action
(Keys/Dials)
Display-Message
Selection of „Edit System“ menu.
1.) Press "EDIT/OK" key.
2.) Use the „PARAMETER/
SOUNDGROUP“ dial to select
"Edit-system“ menu.
\Edit/Function
<7>\Edit\System
Select menu page „<7> RxSetupC“
1. Press „EDIT/OK“ key
2. Use the „PARAMETER
/SOUNDGROUP“ dial to get to to
„RxSetupC“ sub-menu.
\Edit\System
<7>\RxSetupC:OFF
Enable MIDI switching.
Use „VALUE/SOUND“ dial to set
the function to „ON“
\Edit\System
<7>\RxSetupC:\ON
Exit the "Edit System" menu.
Press „EXIT“ key until you reach the
main page.
\T_e_c_h_n_o__x
13:A001:\_303Lead
QUASIMIDI STYLEDRIVE FANSEITE
http://people.freenet.de/styledrive/
