25
12.) Editing the Arpeggiator
In this section you will learn about TECHNOX’ built-in arpeggiator. This arpeggiator splits a chord into
single notes, which then can be played back automatically in different ways. The arpeggiator menu will be
reached by executing the following steps:
Function
User Action/
(Keys/Dials)
Display-Message
Selection of edit level
Press „EDIT/OK“ key
\Edit/Function
Selection of „Edit Arpeggiator“
menu.
Use one of the two Alpha-dials to
select.
\Edit/Function
<6>\Edit\Arpegg.
Confirm selection
Press „EDIT/OK“ key.
Arpeggiator\Edit
|1>\Arpegg.:\\On
Following these steps, the following sub-menus are now available:
|1>
Arpeggiator\Edit
|1>\Arpegg.:\OFF
Use this parameter to switch the arpeggiator on and off.
<2>
Arpeggiator\Edit
<2>\Sync:\Intern
Here you can decide if the arpeggiator will be clocked internally or externally.
When switched to external clock, the arpeggiator uses a MIDI clock signal if this
signal is active on MIDI In of the TECHNOX. If MIDI clock is available, the
arpeggiator will be synchronized to your sequencer.
<3>
Arpeggiator\Edit
<3>\Part:\\\\\13
Here you can select one of the 16 available parts to be controlled by the
arpeggiator.
<4>
Arpeggiator\Edit
<4>\Resolutn:\16
With this parameter the resolution of the arpeggiator will be set. You have the
choice between 4th, 8th, 16th and 32nd notes.
<5>
Arpeggiator\Edit
<5>\Speed:\\\\86
When using the internal clock (Sync: Intern), the arpeggiator speed is set with this
parameter.
<6>
Arpeggiator\Edit
<6>\Gate:\\\\\64
Use this parameter to control the gate time (note length) of the arpeggio notes.
This parameter can also be controlled via the modulation matrix.
<7>
Arpeggiator\Edit
<7>\Directn:\\Up
This parameter controls the direction of the arpeggios. Look at the table below for
the different directions.
<8>
Arpeggiator\Edit
<8>\Hold:\\\\OFF
When set to „ON“, the arpeggiator chord will be held even if the chord on the
keyboard is depressed. (Sometimes this parameter is also called „LATCH“) If set
to „OFF“, the arpeggiator will stop as soon as it receives Note-Off-informations.
<9>
Arpeggiator\Edit
<9|\MidiOut:\OFF
The arpeggiator notes can be sent out via MIDI Out of the TECHNOX when this
parameter is set to „ON“. This offers you the possibility that other MIDI
synthesizers can also use the TECHNOX’ arpeggiator.
12.) Editing the
arpeggiator
The following table shows you the different arpeggiator directions (Sub menu page 7):
1
Direction:\\UP
Arpeggios start with the lowest note first, the others follow in ascending order.
2
Direction:Down
Arpeggios start with the highest note first, the others follow in descending order.
3
Direction:UPDW
Ascending and descending notes consecutively.
4
Direction:\RND
The notes are played in random (no) order.
QUASIMIDI STYLEDRIVE FANSEITE
http://people.freenet.de/styledrive/
