55
Assigning of special footswitch-functions
Assigning of
special footswitch-
functions
desired function
name
description
Masterkeyboard function
Masterkeyb
The CYBER-6 uses the settings from the current
masterkeyboard program
Remote control in the CHAIN mode
Chain-Step
While being in the CHAIN-STEP menu, you can
use the footswitch like [ENTER] to freeze a step. If
there is no step length programmed, the footswitch
can be used to simply jump to the next step. The
masterkeyboard footswitch-function is disabled in
this mode.
Sequencer Start/Stop
Start/Stop
This function enables you to use the footswitch 2
to start or stop the sequenzer. Again, the function
assigned to footswitch 2 in the masterkeyboard
program is disabled.
Freezing a Motivator sequence and enabling
the Motivator transpose function
Mot-Freeze
This setting enables the a special Motivator
function. As long as the footswitch is held down,
no new notes can be entered in the Motivator
mode, but the assigned part of the keyboard can be
used to transpose the sequenze in realtime.
Apart from the the ones described in the “masterkeyboard edit menu” section, there are a few other special
functions assignable to footswitch 2. This functions are available on page 4 of the main menu. Pick this
page using the page dial:
< 4> CYBER-6
Footswitch2 Function: Masterkeyb
Now you can choose the desired function for footswitch2 using the + / - buttons. The following functions
are available:
The function of the footswitch 2 will be memorized automaticly.
Summary of Contents for CYBER-6
Page 1: ...1 B E D I E N U N G S H A N D B U C H CYBER 6 The Realtime Enhancer...
Page 2: ...2...
Page 62: ...62 Warranty card...
