Quasimidi CYBER-6, Manual

Page: 53 / 63

53
calibration of realtime-controllers
Action to be taken to calibrate the
controllers options action
Choosing the realtime-controller Aftertouch,
Pitch-Bend,
Wheel1,
Wheel2,
Pedal,
Controller
1-3 Pick the “Controller” option and use the "+/-"
buttons to select the controller
Set the MINIMUM value for the selected
controller MIN 1.) Move the cursor to the parameter “value”
2.) Use the + / - buttons to pick “MIN”
3.) Set the controller to minimum value. For
Aftertouch, press one or more keys using the
amount of pressure that should not trigger the
Aftertouch
4.) Press [ENTER], and the value is saved as the
minimum value.
Set the MAXIMUM value for the selected
controller MAX 1.) Chose the “MAX” options as described above
in step 2
2.) Set the selected controller to the MAXIMUM
value. To set the Aftertouch sensitivity, press one
or more keys with the highest pressure that is
normally used.
3.) Press [ENTEr], and the value is saved as
MAXIMUM value
4.) Afterwards, the cursor automatically jumps to
the “Controller” option so you can choose the next
controller to calibrate.
Leaving the CALIBRATE menu EXIT Press [EXIT] to leave the CALIBRATE menu