Quasimidi CYBER-6, Manual

Page: 24 / 63

24
Modulation of the sequencer
But with it the real-time-modulations of the motivator-sequences are not yet exhausted. Of course you can
program a masterkeyboard-zone, which sends controllers only on one MIDI-channel which is used by the
motivator. The status of this masterkeyboard-zone should be set to “Control-Only” so that no notes are
sent from this zone. The same opportunity is implemented for the sequencer-tracks.
The modulation-sources for the realtime-modulation of the sequences are selected on the pages 16 and 17
of the menu. Concerning the realtime-modulation of the sequences we have created something very spe-
cial. Mostly you will determine the desired modulation already at the programming of the sequences and
try it out then. As the 8 tracks of the sequencer according to the patterns will have a fully different con-
struction, it is more meaningful to make the selections there. In the masterkeyboard-programs the modula-
tion-sources determined in the sequencer are simply associated to the regulators. In this way you can
change the sequences at retention of a masterkeyboard-program without losing the desired realtime-con-
trol. The three modulation-targets determined in the sequencer are marked with SEQ-Mod 1 - 3. The
regulators/modulation-sources can be associated to these three targets. Concerning this read also the chap-
ter: “realtime-control of sequencer-tracks” on page 39.
The determination is done in the submenus 16 and 17 of the masterkeyboard-edit-area :
<16> SEQ-Mod1: OFF Invert:OFF
SEQ-MOD2: OFF Invert:OFF
<17> SEQ-Mod3: OFF Invert:OFF
MOT1-Trigger: int MOT2-Trigger: int
The second line of the display still is of no interest, you can find further details in the following sector.
desired modulation parameter operation/explanation
selection of modulation-sources for realtime
sequencer-modulation SEQ-Mod
1-3 With this parameter you choose, which
modulation-source controls the
sequencer-modulation.
Inversion of the effect of the modulation Invert If a regulator controls several parameters at one
time it can be meaningful to invert the effect of the
regulator. Turning up the regulator then causes a
lowering of the intensity of the modulation. If the
inversion is activated for one sequencer-track and
switched off for another track, the filter of the first
track can be opened while the filter of the second
track is closed.
Inverting the effects of the modulation Invert If several parameters should be controlled by one
modulation-source it may be meaningful to invert
the effect of the regulators. Turning up the
regulator causes a lowering of the intensity of the
modulation. If the inversion is activated for one
of the motivators and switched off for the second
one, one can lengthen the gate-time of the first
motivator while the gate-time of the second one is
shortened.
Modulation of the
sequencer