C
HAPTER
I
-
B
ASIC
O
PERATION
T
URN
O
N YOUR
DVD
P
LAYER
Press the power button on the Player or remote controller, and ‘Read’ appears on the TV
screen. If there hasn’t a disc in the DVD player, ‘No Disc’ will be displayed on both the
screen and the VFD.
P
LACE A
D
ISC INTO THE TRAY
Press the Open/Close button on the remote controller or the front of the DVD player, and
‘Open’ appears on the screen. Then place a disc gently into the tray with the disc’s label
facing up (double-sided discs have content on both sides, so you can place either side up),
and press the Open/Close button again to close the disc tray, ‘Close’ appears and the player
starts to read. Then the disc starts playing automatically. (
No e O some ce ain type discs,
after reading out the type, the Play or Enter bu on should be pressed to start playing.)
t : f
rt
tt
P
LAY DISCS
The contents of each disc menu vary according to how the disc was authored and what
features are included. The disc menu will be turned on for you to select, when Menu button
pressed. Also play and pause can be switched with the Pause button on the remote.
Moreover, such as menu play, title play, sequence play, etc., these different play modes are
offered.
Menu Play (compatible with DVD, SVCD, VCD2.0 discs)
1 – Press Menu button
-
TV screen displays the DVD root menu when a DVD disc is loaded
-
When a SVCD or VCD2.0 disc is loaded, SVCD or VCD2.0 menu will be displayed on the
screen (when PBC is off) – At this moment, press PBC button once to display current PBC
state.
-
PBC is initialized on when a SVCD or VCD2.0 disc is loaded.
2 – When a DVD disc is loaded, you can press Arrow buttons to highlight the menu items
you want to choose; as SVCD or VCD2.0, you can press Numeric buttons to select a track to
play.
3 – Press Enter or Play button, you can begin play with the highlighted.
4 – Return when playing: When a DVD disc is playing, press Menu (PBC) button, and you
can return to Root menu; as SVCD, VCD2.0, and PBC is on, press Menu (PBC) button, you
can return to the menu.
5 – Stop:
-
When you press Stop button for the first time, the player turns into quasi stop state. At
the same time the OSD appears ‘Quasi Stop’. To begin the title over, press stop twice.
-
In quasi stop state, the player remembers where you stopped, when you start playing
the disc again, the DVD player picked up where you left off.
-
In stop state, when you press Play, the player enteeers sequence playback mode.
For the disc protection, before you press Open/Close button to eject the disc tray
when playing, please press Stop button at first. After taking out the disc, press
Open/Close again to close the tray.
If you’re not going to use the DVD player for a long time, be sure to remove the
electronic plug.
QUARTEK USA TradeMark
DC-715DX - User Manual– English V.2
12/33
